[Asreegan]

Hi all,

I've just recently converted my e92 from n46 to n54..I only managed to get hold of a e91 which everything was transferred to my e92..The issue is that e92 originally drops and raises its windows 5/6mm when the doors are opened and closed, since my wiring is from an e91 that feature doesn't operate..appear it's your guidance If I could get it to work..aside to that my central locking doesn't work as well..would it be possible to make it operate again..your guidances are very much appreciated

[Sav.]

Originally Posted by Asreegan

Hi all,

I've just recently converted my e92 from n46 to n54..I only managed to get hold of a e91 which everything was transferred to my e92..The issue is that e92 originally drops and raises its windows 5/6mm when the doors are opened and closed, since my wiring is from an e91 that feature doesn't operate..appear it's your guidance If I could get it to work..aside to that my central locking doesn't work as well..would it be possible to make it operate again..your guidances are very much appreciated

I would look for someone that does coding in your area, I can't imagine why this wouldn't be able to get coded in.

[Ozzie335i]

You don't even need a local coder as this kind of stuff can be done via the net. You can do a session share with the coder, watch and speak with him, yes him, while the work is being done.

[Sav.]

Originally Posted by Ozzie335i

You don't even need a local coder as this kind of stuff can be done via the net. You can do a session share with the coder, watch and speak with him, yes him, while the work is being done.

Viable option, as long as one doesn't mind purchasing the required hardware.

[E92William]

You just need a kdcan likely and have the software in your computer/laptop which you should have anyway to do it with a guy online. Or DIY it with one of the thousand videos online on how to code this stuff

[Asreegan]

Thanx a million guys will try to get it done..fingers crossed

[eduardospm]

Did you transferred the entire electrical wiring harness? Because I have an e90 that came with the n46b20 engine and I decided to swap to a n52b30 (I got it from a crashed car in excellent condition) but idk if the wiring harness is required bc someone told me about the fuel pump pressure would be a problem since the n46 uses a fuel pump without the EKPS module. Any advices?