Quote:
Originally Posted by portugal335i
I guess this will work for the n54 cause they have the same solenoids
BMW n55 pwg boost solenoid bypass
2011 e90 n55 pwg (USA car) mhd stage 2+ 93 octane.
I bypassed the boost solenoid pressure converter by disconnecting the vacuum hoses from the boost solenoid and connect the hoses with a 1/8 barb straight connector so that all the air from vacuum pump goes to the wastegate actuator to keep the wastegate valve close all the time to get faster throttle response.
The result is less throttle lag and the car is running stronger. No check engine light nor codes…..love it.
And….this is a good way to test a solenoid (low Boost situation) without a vacuum pump.
Bypass the solenoid and if the boost goes up it is a bad solenoid, if the boost stays the same (low) the boost leak is somewhere else.
The solenoid bypass will stop the wastegate rattle too!
|
Wastegates closed all the time?
lol, that should be a surefire way to kill the turbos